|Prev||Professional Automotive Repair Technical Discussions for July 31, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2000 Audi A4 Quattro 1.8L Misfire, MIL Lamp on, Mil Flashing VIN: WAUDC28C2Y
Misfire cylinder #4 only at idle, only when warm. I would have to say that this misfire isn't a "dead" miss but rather "half dead" if that makes any sense. (If you perform a cylinder balance test, #4 rpm drop is about as half as the rest, so the cylinder is "w...
|1986 Mercedes-Benz 560SEL 5.6L 2-3 shift VIN: WDBCA39D9G
This beauty is my Sunday driver and it has developed a 2-3 shift problem...no upshift The clue may be that if I slip it into neutral for a split second and right back to drive it will shift ok. I'm not interested in pulling the trans out for repair, I can c...
Fixes & Summaries for European
|2001 BMW 525i 2.5L Vanos VIN: WBADT43441
The mechanic who rebuilt the engine did not properly time it. All of the intake valves were bent. I put on another head, used the proper tools to time it, and it runs great. No codes and great power. The vanos tools are a must when working on these engines.
|1995 Jaguar XJS 4.0L blower motor, compressor VIN: SAJNX2740S
Sorry for the long delay but MUCH THANKS for all the help on what I thought was my nightmare jag...but in reality the problem was simple it was the blowers motors both of them! The driverís side went out a while ago (I suspect) so when the passenger side went ...