Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for July 31, 2011
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
2004 Honda CR-V EX 2.4L No Start, Misfire, MIL Lamp on VIN: JHLRD77834
. Intermittent no- start, codes P0661 (Intake Manifold Runner Control Valve Position-Low Voltage) and P0300, 301, 302 Misfire. . Car came in with no-start condition. Customer says he has been getting misfire codes for last 3-4 months. Other codes shown which... Trouble codes: P0661 (Intake Manifold Runner Control Valve Position - Low), P0300 (Misfire multiple cylinders), P1077 (Intake Manifold Solenoid), P0135 (A/F Sensor 1 Heater Circuit Malfunction)
View
2006 Honda Pilot EX 3.5L timing belt VIN: 2HKYF18506
i have re installed this belt 10 or 11 times i have never had a problem like this before not sure where to go from here i need some suggestions on how to keep the timing marks all lining up so i can then try to locate the source of the tick.
View
2003 Kia Sorento EX 3.5L sunroof VIN: KNDJD73303
replaced motor and the over head console switch and still the motor is only working for tilt only which is more than it was doing before, the issue is getting the correct diagram
View
2007 Mazda B3000 DS 3.0L Pushrods VIN: 4F4YR46U68
Hello.I've got an odd one here with a push rod problem. This vehicle came in with misfire codes 303 and 306. The customer was told to replace the original plugs(132k).The truck was not running rough or noisey at this time. The customer replaced his own plugs a...
View

Fixes & Summaries for Asian
Fix/Summary Answers
2004 Kia Rio 1.6L head VIN: KNDAC12554
Thanks for the replies I received, the problem was the head work that was done, the original head work when they removed broken valves replaced, installed seats, to do that they had to remove cam carrier, which was sealed with a small amount of sealer between ...
7
1999 Mazda 626 LX 2.5L No Start VIN: 1YVGF22D5X
Well, it's time to close this and I hate to say it but it still is not fixed. I did check fuses, power and grounds, relays,etc. It turned into a bit of a waste of time. Customer took it to the dealer and the last I heard was that they made new keys for it but ...
7
1991 Mitsubishi Galant 2.0L all shifts VIN: JA3CR56V8M
The problem was the transmission control module...again. I replaced the original one with a "new used" one. Sorry for not making that clear. Replaced it with another module and it shifts great once again. Thanks for everyones input!
4
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next