 Prev |
Professional Automotive Repair Technical Discussions for July 30, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2005 Audi A4 Quattro 1.8L Surge, MIL Lamp on VIN: WAULC68E15 New customer.made appt for rear brakes then sprung this on me.engine light been on awhile.came in codes p0303 p0171.found #3 coil arcing...replaced 1 coil and 4 spark plugs.tested after ignition concern for possible false lean code...02 stopped reading/ respon... Trouble codes: 00171 |
View | |
| 1999 Volvo V70 2.4L No Start VIN: YV1LW55A6X does the fuel tank have to be removed to replace fuel pump? |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2000 BMW 323i 2.5L abs/dsc VIN: WBAAM3341Y allright guys this p.o.s. is in the fixed column.!!! First of all thank you all from I.A.T.N. nation, The ones that responded were all helpfull. Here was the fix. On a D.S.C.Brake system the master cyl has a nipple on the bottom of the resivior like a clutch ... |
10 | |
| 2000 Volkswagen Beetle GL 2.0L fuse5 and 9 blow together VIN: 3VWCA21C1Y thanks to everybody for the input. What i found is those two circuits 5 and 9 do share a splice about two feet in from the fuse box so it is likely the will blow together if there is excessive load. Tom was on the right track with the pressure switch it appear... |
11 | |
| 1991 Volvo 240 2.3L Mechanical VIN: YV1AA8849M This engine does not have an engine oil cooler. I did repeat the cooling system pressure test and the gauge did not drop at all for the couple of hours I left the tester on it.This was with a cold engine. Then I repeated the pressure test with the engine warme... |
10 | |
| 1995 Volvo 850 Turbo 2.3L blower motor VIN: YV1LS5711S i had the dash out to fix the dash mounts so i decided to just replace the blower motor, resistor and the control head. still not sure the cause but all is good now |
5 |
