|Prev||Professional Automotive Repair Technical Discussions for July 31, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for GM
|1996 Chevrolet Beretta Z26 3.1L Cuts out, Misfire, Poor Fuel Economy VIN: 1G1LW5M2TY
hello everyone, I have installed a rebuilt engine in this car 2 wks ago for cambearings spinning, customer had already complained about gas milage being off. She now also complains of missing. when you drive the car for the first time for the day, get to about...
Fixes & Summaries for GM
|2004 Buick Rendezvous CX 3.4L Blower Motor VIN: 3G5DBO3E04
thanks to all that responded ,the problem was the orange wire that controlls high speed ,was shorted to power with the red ign 3 wire that is always live ,the harness was under the dash behind the air bag ,the two wires rubbed together on a metal brace , the o...
|1990 Cadillac DeVille 4.5L Hesitation, Cuts out, Stall
Big thanks to everyone for taking the time to reply. Those of you who said "put a fuel pump in it" nailed it. I ended up replacing the fuel pump and sock and the car runs like a top. Great help! Thanks again.
|2001 Cadillac DeVille 4.6L Driver side vents VIN: 1G6KD54Y01
Thanks for all the input. I went to the wrecker and got a used HVAC box and install it. Know it is blowing cool out both sides.
|2001 Chevrolet Corvette 5.7L temp gauge VIN: 1G1YY22G61
Hi guys, Thanks for the help, it wasn't as comlicated as we had convinced ourselves it was. The short story is that a thermostat fixed it. For those who follow the details: We pulled the PCM down and checked the voltage at the ECT signal -- voltage there ag...
|2008 Chevrolet HHR LS 2.2L shifter VIN: 3GNCA13D38
I have the problem fixed.I replaced the transmisson range switch.the switch was not telling the BCM that the car was in park so it did not see the need to send voltage to the lock soliond. once I replaced the switch it was fine. thanks for the help.