× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 15, 2007
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1997 Chrysler Sebring JXi 2.5L limp in VIN: 3C3EL55H7V
this vehicle sets a code 18 in the tcm for engine rpm signal and a code po700 in pcm. have checked signal to tcm & pcm with lab scope & signals are the same the pcm shows engine rpm but not the tcm. We have tried a new tcm with no luck.was wandering if anyone ...
1992 Dodge Ramcharger 5.2L No Start, Stall, Crank sensor voltage VIN: 3B4GM17Y8N
Has intermittent stall/no start and sometimes just plain no start. Have tested ignition switch and power to ecm when problem occurs, replaced crankshaft position sensor and camshaft sensor, no effect on problem. My question before condeming the computer is abo...
1996 Dodge Caravan 3.0L MIL Lamp on, loss of speedo VIN: 2B4GP4520T
HI Guys, I'm back already. I've got this Caravan in for replacement of both axle seals and pump seal. A week after completing the job the customer comes in complaining that the speedometer quit working and the doors locks don't lock when driving and the tra...
1998 Dodge Ram 2500 5.9L low power VIN: 1B7KF23ZXW
Hellow everyone, pickup orignally came in with bad tranny,after replacing tranny customer complained of low power. Customer stated power was fine before tranny replacement, so another tranny was installed with same results. When driving it seems to be a lack o...
2001 Dodge Neon ES 2.0L Surge, MIL Lamp on VIN: 1B3ES46C41
Vehicle came in with no power. Put in a cat old one plugged. Timing off half a tooth replaced belt. Cam code present signal dropping out replace sensor code gone. Vehicle now runs ok. Still have surge comes in right a way but gets worse as the car warms up. Do...
2001 Dodge Ram 2500 5.9L Cuts out VIN: 3B7KF23671
Hey Dodge Diesel techs. I'm working on a 2001 Ram with 107000 miles that will intermittently cut out. It happens most when I accelerate from a stop at a light steady throttle position somewhere in the area of 35-50% APPS. Occasionally when it is really acting ...
2001 Dodge Stratus R/T 3.0L Poor Idle Quality, Surge, Stall, MIL Lamp on VIN: 4B3AG52H81
in the last 2 weeks vehicel has developed a rough idle, engine will random miss at idle and rpm will surge 200 -300 rpm and sometimes when idleing for 10 minutes engine will stall but restart ok. lt trim is 4 - 5 positive, oxygens sensors are switching, cranks... Trouble codes: P0300, P0141 (b1 sensor 2 heater circuit)
2003 Dodge Neon SE 2.0L shifting VIN: 1B3ES26CX3
Car came in not shifting. No codes. Checked PCM data with Mastertech and found transmission in limp in mode. Looking at data stream transmission tempature sensor reading -3 degrees. Double checked with Genisys and had same reading. Tested voltage to plug in an...
1998 Jeep Cherokee Classic 4.0L a/c airflow VIN: 1J4FJ68S0W
I replaced the evaportor core in June. Customer brought vehicle back stating that after being driven for about 70 miles on freeway the A/C started to get warm. They got off freeway and drove anther 10 miles with the a/c not working. Left car for weekend and Su...
2003 Jeep Liberty Renegade 3.7L Cam Sensor Location VIN: 1J4GL38K23
Sorry for such an elementary question but can someone please tell me where the cam sensor is located on this engine? I don't have any information on it in my reference material and I can't seem to locate it on the engine Trouble codes: P0340

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Chrysler Sebring LXi 2.5L Misfire, MIL Lamp on VIN: 4C3AU52N8T
the vech. left the shop after many test drives with out any codes comming back well wouldnt ya know it after a few days the light is back on the coustomer has mot come back in as of now. i do susp a problem with the used dist.we put in . thank for all your hel... Trouble codes: P0300, P0304.
2000 Chrysler Neon 2.0L No Start, Poor Idle Quality, Stall VIN: 1C3ES46C3Y
Thanks for the help I followed all leads to the end and have not come up with the answer. Currently I have sent all computers back thru chrysler to the remanufacture for evaluation.
1997 Dodge Ram 1500 Laramie 5.2L engine VIN: 1B7HF13Y2V
thanks all for your input . we dropped oil pan, checked bearings (ok) and installed oem oil pump w/pickup. when we replaced oil pump previously, the cust insisted on high volumn pump. as of today, cust has had no oil pressure issues . when cust returns f...
1999 Dodge Ram 1500 Laramie 5.9L MIL Lamp on VIN: 3B7HC13ZXX
PCM was the fix. Thanks for the replies. I was hung up on the TSB that required a Reflash to fix a noise caused by the ignition switch. Did find noise but the reflash did not fix it. Trouble codes: P0443 (EVAP Solenoid Circuit).
2000 Dodge Neon High Line 2.0L won't start VIN: 1B3ES46COY
This one is fixed, it was a bad starter, these Neon's doesn't give any warning before going bad, thanx for all replies.
2001 Dodge Ram 1500 Laramie 3.9L Cuts out VIN: 1B7HC16X51
I want to thank those who responed. That is what this site is all about. Now on to the fix. The customer requested a new ECM, not a rebuilt. A new ECM was installed, a Snap-On brick used to set the VIN, and the the truck runs. Problem solved? Yes and no...
2004 Dodge Neon SXT 2.0L Surge, Cuts out, MIL Lamp on VIN: 1B3ES56C74
Fisrt thanks to all the techs that took the time to read and reply. I fixed this with a crank shaft postion sensor. I hooked a duel trace osiliscope to the cam shaft and crank shaft postion sensors and ran engine about 3500 rpm I would see a signal drop out... Trouble codes: 344 (intermitent cam signal loss).
1995 Jeep Grand Cherokee Limited 5.2L Cuts out VIN: 1J4GZ78Y6S
Well . . . this one was interesting. After it was all said and done the bloody cap and rotor fixed it. After reading the first few responces, I was leaning toward a problem with the fuel injectors as what Patrick was suggesting. In fact, I had allready pull...
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next