|Prev||Professional Automotive Repair Technical Discussions for April 28, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2006 Chrysler 300 Touring 3.5L Steering VIN: 23CKA53G36
This vehicle came from another local shop with a front end shake after reaching 55 mph and faster. We found loose inner tie rod ends, cracked lower control arm bushings and tension bar bushings. All have been replaced including front struts and rear shocks. No...
|2007 Chrysler PT Cruiser Limited 2.4L 1st row pass seat VIN: 3A4FY58B07
got codes b1b54 b1b56 replaced left front belt buckle and got new code b1b55 now im stupped
|2008 Dodge Ram 1500 SXT 5.7L 1-2 shift VIN: 1D7HU18258
Hello all, have another fun one here. Customer concern vehicle does not drive normally. Will shift at high RPM and then not shift. p0732, p0733, p0869, p0933 found in PCM. Line pressure circuit appeared normal. PCM powers and grounds looked good. After the f...
|2009 Jeep Compass Sport 2.4L Poor Idle Quality, Hesitation VIN: 1J4FF47B29
evening techs, I got this Compass that came in with no throttle response and codes p2101,p2110,and p2118. I scanned the data and found the app responding-but the tps did not react. so I replaced the throttle body and did the re learn. Still have the same probl...
Fixes & Summaries for Chrysler
|2003 Chrysler 300M 3.5L Poor Idle Quality, Stall VIN: 2C3AE66G83
First THANK YOU ! to all who replied. The fix was the Computer. After ohming the IAC and wires it was the last item. Trouble codes: P0508 (IAC Valve sensor circuit low).
|2003 Dodge Grand Caravan EX 3.8L Starting VIN: 2D4GP74L43
Thank you for your help. After verifying that the Ecm had all the proper inputs and good grounds I determined that the Ecm itself was bad and not grounding the control side of the relay. the customer decided the van was not worth the cost of the ecm and decide...