|Prev||Professional Automotive Repair Technical Discussions for April 29, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler 300M 3.5L prndl and autostick VIN: 2C3HE66G3X
Ok guys here is a good head scratcher!. to start off this vehicle has a newer remand transmission with auto stick. when in park or neutral all lights on prndl are lit up. when in reverse or drive only that gear is indicated. when the gear selector is place in ...
|2008 Dodge Ram 1500 SXT 5.7L Flywheel Noise VIN: 1D7HU18288
So i have one for ya. this truck is not at my shop it is at another shop that i do a lot of business but truck came in with a chipping noise tinging noise sounding just like a broken flywheel they remove trans and flywheel was not bad they put flywheel in and ...
|2011 Ram 2500 Laramie 6.7L Power Mirrors VIN: 3D7UT2CL9B
This Ram has power mirrors that won't go up or down. The side to side works fine. When put in reverse, they will not self adjust as they should. I cant seem to find good info on Mitchell or Alldata. Diagram does not even show the switch just the door module an...
Fixes & Summaries for Chrysler
|2010 Chrysler 300 C 5.7L starting VIN: 2C3CA6CT7A
reflashed tipm module and all is well problem has not occurred again and car has not returned thanks everyone for your help
|2001 Dodge Durango R/T 5.9L No Start VIN: 1B4HS28ZX1
Third PCM ( supplied by customer - All were Cardone )programmed in VIN and vehicle now starts and runs. Also had replaced bad harness and connector at transmission. Thank you for all the replies
|2007 Dodge Charger 2.7L MIL Lamp on
Maybe I'm discovering a little precedent here or maybe I just got lucky. Luckily the owner of the car lot had not thrown the original pcm away. When I put it back in and programmed it by telling WIN to transfer VIN with proper PIN, the WIN relearned the origin...
|2010 Dodge Ram 2500 ST 5.7L Engine VIN: 3D7TT2CT2A
Tank you all for your help and support. As many of you have supposed, one push rod was not correctly engaged an was keeping the valve stuck. Now the engine runs. Here is the funny part of the story: I loose my job because i refused to finish the hole job in...
|2011 Dodge Grand Caravan Crew 3.6L diag VIN: 2D4RN1AG98
Hello This one goes to the dealer let them fixed.Thanks for your help.I steel don't know if tech authority close down witech pods?
|2011 Dodge Nitro Heat 4.0L Misfire, MIL Lamp on VIN: 1D4PU4GXXB
Thanks to all for the ideas. After several days worth of disassembling to check timing marks(they were right on) and time checking cylinder leakage and using dial indicators to make sure rockers were off lobe, we added a .005 brass shim under the rocker stands... Trouble codes: P0300 (Random missfire).