Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for October 3, 2014
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
2005 Ford Taurus SE 3.0L MIL Lamp on VIN: 1FAFP53235
The check trans light comes on when the cooling fans are on high speed.The trans fluid temp sensor drops down to zero volts when the fan goes to high.The fans also change speeds back and forth when ect sensor is hooked up.When I unhook ect sensor the fans go t... Trouble codes: P0712 (p0462-), P0462 (p0481-), P0481 (p0191-), P0191
View
2008 Ford F-250 Super Duty XLT 6.4L engine VIN: 1FTSW20R28
noise sounds like loose rocker arm drivrs side
View
2008 Ford F-350 Super Duty XL 6.4L Excessive Emissions, No Start, MIL Lamp on VIN: 1FTWW31R28
Ok guys bare with me not the best diesel tech here (apparently). So this 08 f350 6.4l diesel came to me about 4 years ago. It has been serviced by our shop and nobody else. Oil and filter changes have been done regularly. Oil at 5k and filters at 10k truck has... Trouble codes: P008E, P215A, P0193 (Fuel rail press cir a high input), P1336 (Ckp -cmp input sig to pcm concerns), P0219 (Engine over speed concerns), U0151 (lost comm with restraint control module)
View

Fixes & Summaries for Ford
Fix/Summary Answers
2000 Ford F-350 Super Duty Lariat 7.3L Gauges VIN: 1FTWW33F1Y
Yes this Ford is done and gone. I had many replies stating that water leaks from windshield on to central junction box, and gem module. It bothered me that everything would work when I pushed door lock button, to the lock position. As long as I held it down ev...
17
2006 Ford F-350 Super Duty XLT 6.0L No Start VIN: 1FTWW31P46
thanks for the great replies. after trying a know good ficm and pcm we went though and check injection current and voltage all were ok. out of pure frustration I order a rebuilt injector and plugged it into the harness and it functioned fine. We replaced all t...
9
2006 Ford E-250 5.4L MIL Lamp on VIN: 1FTNS24LX6
First I would like to thank all of those who tried to help. I'm sure the information will be useful in the future. I spoke to the owner shortly after I made my request for help and before I had gotten the generous help from others on IATN. I knew I was missing... Trouble codes: P0113 (IAT Circuit High), P0114 (IAT Circuit Intermittent), P0193 (Fuel Rail Pressure Circuit High), P2195 (Lack of HO2S B1S1 Switch Indicates Lean).
7
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next