|Prev||Professional Automotive Repair Technical Discussions for June 28, 2009
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1989 Dodge Dakota 3.9L reverse VIN: 2DF458Y416
could it be in overdrive unit? read something about manel correction 4 clutches instead of 5. reacation shaft appears to be ok. all forward gears fine.
|2004 Dodge Ram 1500 Truck ST 5.7L No Start VIN: 1D7HU18D44
vehicle towed in. mil on, etc light on.engine has no injector pulse. vehicle had code 2106 and 2111 in memory.these problems related to the etc assembly(throttle body). could not find definition of p2106 in mitchell or alldata. code 2111 is throttle valve unab... Trouble codes: 2100 (etc motor circuit), 2111 (throttle stuck closed), 2112 (throttle stuck open)
Fixes & Summaries for Chrysler
|2004 Chrysler Concorde Limited 3.5L No Start, Surge, Cuts out, Stall, Misfire VIN: 2C3HD56G54
Thanks for the help fellows. I swaped the cam sensor and cam gear with the tone ring(D/S) and all is well. The installer had already swapped the flywheel. These engines will swap but you need to swap flywheel cam sensor and cam gear due to a difference in the ... Trouble codes: P0340.
|2000 Jeep Cherokee Sport 4.0L Battery sensor VIN: 1J4FF48SXY
Haven't actually got into it yet but seems the consensus in here is the tension on the balt needs to be tighter than an ants' twat so try that first and THANX AGAIN for your SUPPORT!