 Prev |
Professional Automotive Repair Technical Discussions for March 2, 2008 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2000 BMW 528i 2.8L Misfire, MIL Lamp on VIN: WBADM6349Y This car runs great. Only problem I can feel is when cold it starts like a slight misfire is happening. Sometimes it will get a code for #2 misfire. I have replaced the coil, plugs. I have rotated the injectors to see if the misfire feeling or misfire follows ... Trouble codes: 18 (Manufactures Exhaust cam sensor), 1397 (Generic scanner code Exhaust cam sensor) |
View | |
| 2000 Jaguar XJ8 4.0L Poor Idle Quality, MIL Lamp on VIN: SAJFA24C4Y hi guys specially jag techs, today i've got an xj8 model year 2000 , a very intermittent , you can drive for 100 km before it acts up with the problem, mil on, dtc in generic obd 2 p0121 , goes into limp mode, fail safe on display plus trac not available-- t... Trouble codes: P0121 |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2002 BMW 330Ci 3.0L Unknown VIN: WBABS53482 Thanks for all the replies. The customer ended up at a dealer for whatever reason and they made a repair- I believe they replaced the oil pressure switch but the customer was unsure as to what they did- if it is fixed remains to be seen. Thanks again, Greg and... |
8 | |
| 2001 Mercedes-Benz ML320 3.2L Cuts out, MIL Lamp on VIN: 4JGAB54EX1 thanks for help, I tested crank sensor as described and found problem was with crank sensor. Installed new sensor, all is good. Thanks to all who replied Trouble codes: P2034 (Cam sensor fault). |
12 |
