|Prev||Professional Automotive Repair Technical Discussions for May 6, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2005 Chrysler 300 C 5.7L compressor VIN: 2C3AA63H15
hey guys & gals. I'm having a problem with a 300c with the a/c not turning on. the system is full, the pressure pid in the scanner is 101psi, the relay is good & when ground is applied to it, the a/c works. I checked the resistance of the evaperator temp senso...
|2008 Dodge Ram 2500 SLT 6.7L tempeture VIN: 3D7KS28A58
What would cause the high side pressure to come down to 80 or 90 when going down the road at speed and it works good at slower speeds and sitting in the shop?
|2003 Jeep Grand Cherokee Laredo 4.7L compressor clutch VIN: 1J4GW48N73
veh. has had 4 compressors installed by other shops along with every piece to ac system from evaporator to condenser and all hoses but still burns up compressor clutch after 2 to 3 days of replacing compressor not sure where to go from here anyone had issues l...
|2005 Jeep Grand Cherokee Limited 4.7L left axle VIN: 1J4HR58N65
This 200F differential is trying to win. I had to replace the steering gear which required dropping the front differential assembly. I needed to replace the axle seals anyway. All was going fine until I got to the left axle. I can't get that thing to pop out o...
Fixes & Summaries for Chrysler
|2007 Dodge Charger SXT 3.5L upper plenum VIN: 2B3KA43G77
Replaced upper plenum, came with throttle body, both solenoids/actuators, map sensor and gasket and bolts. Thanks to all who responded.