× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for May 5, 2015
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2006 Chrysler 300 Touring 3.5L Parking Lights VIN: 2C3KA53G96
This vehicle has no parking lights or fog lights.installing a break out relay and the lights all work, the signal from the gateway module is good. We installed a new headlight swutch and a forward control module and had it programed but still no function.we tr...
2008 Chrysler Town & Country Limited 4.0L No Start, Misfire, MIL Lamp on VIN: 2A8HR64X68
This vehicle came in for a rough idle and check engine light Found codes P0302 misfire cyl #2 and P2305 ignition Coil 2 secondary circuit insufficiant ionization. Confirmed misfire in cyl #2. Removed intake and removed # 2 coil. It was melted at the top where ... Trouble codes: P2305 (Ignition coil 2 secondary circuit insufficiant ionization), P0302 (Cylinder 2 misfire)
1999 Dodge Ram 3500 5.9L Battery VIN: 1B7MF3360X
The complaint on this Dodge is after sitting for 7 days the battery is dead, I checked the batteries and replaced with new ones and checked it for a drain, none found but it still was dead after 7 days. The customer figured out if he unplugs the seat connector...
2002 Dodge Ram 1500 ST 4.7L Hesitation, Stall VIN: 1D7HA18N62
got this truck towed in customer states cranks no start, we put in a crank sensor and now starts with a miss on #6. the customer had it at different shop came into us with wires exposed ecm not mounted ect... #6 coil wire was cut and soldered back at the coil ... Trouble codes: P0356

Fixes & Summaries for Chrysler
Fix/Summary Answers
2010 Chrysler Town & Country Touring 4.0L Stall VIN: 2A4RR5DX7A
Because this problem was so sporadic I never experienced the stalling problem with the scanner on the vehicle. I have never experienced a crank sensor failure that would cause a vehicle to stall without setting a DTC but we replaced the crank sensor as suggest...
1996 Dodge Stratus 2.4L Injector VIN: 1B3EJ46X3T
Sorry this took so long to close out. Very difficult to find a used pcm for this car (used only in 1996). There were no codes setting. Changed out the pcm and all is good.
2005 Dodge Ram 2500 Laramie 5.9L No Start
Well I have emailed some of you back since we are only allowed on update. I have not repaired the veh. I have narrowed it to the ecu/pcm I have checked and double checked the harness. the veh like I said will start and run for a split sec and die. pull the key... Trouble codes: P2146, P2149.
1992 Jeep Wrangler 2.5L clutch hydralic VIN: 2J4FY19P5N
Slave cylinder not leaking, Replaced flywheel. OEM bulletin says not to machine flywheel. will find out in 1000KM if system is still okay. thanks for help. Gordon
2002 Jeep Grand Cherokee Laredo 4.7L Jerks in and out of gear VIN: 1J4GX48N32
Hello everyone and thanks for the help on this one. We ended up putting a used unit in this vehicle. We lowered the pan to drain it and noted that a servo piston has blown out of its hole in the pan area. A used tranny fixed it right up. Ron
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next