|Prev||Professional Automotive Repair Technical Discussions for December 16, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1996 Dodge Ram 1500 5.2L Starting VIN: 1B7HF16Y8T
Hello Everyone! This dodge pickup will not start. The motor cranks just fine. No spark, no inj. pulse, no 5v reference on any of the sensors, no communication with PCM. The engine light does not illuminate. There is power at the pink wire of the DLC. Any sugg...
|2003 Dodge Grand Caravan SE 3.3L No Start VIN: 1D4GP24353
Hey Guys, I have this vehicle that would not crank, I have no communication with PCM. I do have communication with bcm, tcm, abs, and air bag. There is no voltage on Pin 44 ( 8 volt supply). Disconnected crank & cam sensors, still no voltage, but I did notice ...
|2008 Dodge Grand Caravan SE 3.3L Hesitation, Surge, Misfire VIN: 1D8HN44H08
Customer brought in vehicle complaining of a misfire at highway speeds and requested a tune up. Replacement of plugs, wires, and coil made no difference with the van. Using our scanner(snap-on Modis Ultra) the computer is not seeing a misfire nor is it setting...
Fixes & Summaries for Chrysler
|2005 Chrysler 300 Limited 3.5L Unknown VIN: 2C3JA53G65
Thanks for all the help guys! I checked the crank sensor for operation and damage and it checked out ok. Also called local Chrysler dealer and found out that the torque converter bolts are re-usable. Then performed a cam/crank relearn and the quick relearn in ...