Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for December 16, 2014
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
2002 Nissan Altima S 2.5L Poor Idle Quality, Cuts out, Stall, MIL Lamp on VIN: 1N4AL11E32
Hello, We have this Altima here that stops accelerating and goes into fail mode intermittently. I've checked the wires and connectors and all good, no short. I've replaced the throttle body many times as well. Performed all relearns as well. One time when I d... Trouble codes: P1128, P0507
2003 Nissan Xterra SE 3.3L No Start VIN: 5N1ED28Y73
We drove this nice truck in. Replaced the plugs and wires. It now does not start. No communication to ECM (other modules good). The SES light will not come on. We only have .2 volts on all 5 volt sensors. Relay and battery voltage good at ECM. Retraced our wor...
2006 Suzuki XL-7 Premium 2.7L MIL Lamp on VIN: JS3TX92VX6
This vehicle is being handed down to me after several new parts have been installed and vehicle still having the same code come back with a PO456. I have noted the parts that have been replaced just reaching my hand out for any thoughts before I dive into this... Trouble codes: P0456
2012 Suzuki SX4 JA 2.0L auto power locks VIN: JS2YB5A35C
Good day fellow techs. I, have customer that pushed started their car (battery flat), and when they got out to thank the helper their keys got locked inside. Is there a way to disable the auto lock feature? Alldata and google offer no help.

Fixes & Summaries for Asian
Fix/Summary Answers
2005 Hyundai Santa Fe GLS 3.5L Unknown VIN: KM8SC73E85
Sorry for delay in response. Customer did not return for further Diagnosis. I made attempts to call him back for more diag. with no response. Thanks for all that took the time to respond.
2009 Infiniti G37 X 3.7L Hesitation, Surge, Cuts out, Won't go over 2400 R VIN: JNKCV61F69
I am going to call this a fix. The car has not returned and the customer has not returned our call asking for input. I think the suggestion that the computer substituted a value for the possible bad MAF is a good one. We replaced both MAF sensors since they... Trouble codes: P010B.
2006 Lexus GX470 4.7L exhaust leak VIN: JTJBT20X06
thanks for the replies.yes I pulled the motor mount,jacked it up,took out the nuts/studs and it slid right out.customer wanted to weld manifold flanges,new manifold is $1000.cleaned it up and had it done in 5 hours.
1987 Nissan Pathfinder SE 3.0L Excessive Emissions, Surge, Cuts out, Stall VIN: JN8HD16Y3H
Thanks to everyone for your suggestions. Robert gave good info on checking the distributor, Jamie was right about corroded connectors (we had repaired that prior to the post), Steve helped me get my suspicions off of the ecm, Jason and Al suggested ohm testing... Trouble codes: 44 (testing and results).
2009 Subaru Legacy 2.5i Limited 2.5L evap leak? VIN: 4S3BL62659
Replaced faulty FTP sensor, frozen/stuck/failed to change, causing false evap pressure readings. Thanks for the help guys
2001 Toyota Camry CE 2.2L MIL Lamp on VIN: 4T1BG22K11
ok I did smoke test it didn't find or see any leaks but a couple of you said to check the roll over valve on the top of tank I didn't check that but it was holding pressure the customer didn't wanta fix it at this time so when he comes back I will pressure it ... Trouble codes: P0440.
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next