Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for April 25, 2014
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Ford
Help Request Answers
1998 Ford E-150 Econoline 4.6L all gauges VIN: 1FDRE1462W
this is a strange one, replaced starter and everything was fine for a few hours, customer brings van back and says gauges are going crazy. if you turn key on,no crank, all gauges except oil gauge go to 0, oil gauge goes to high. when you crank van all gauges g...
1998 Ford Explorer Eddie Bauer 4.0L All Systems Controlled By Gem VIN: 1FMZU34E3W
Thanks ahead of time to those who respond. The problem is that the gem is intermittent. I have pulled the module and tested all power and grounds. I have tested the relays involved in powering up module. I have pulled the fuse panel and checked for water intru...
2010 Ford E-150 5.4L Stall
vehicle runs and drives fine only has problem when hvac blower is turned to low it dies and wont start unless you turn blower speed up Trouble codes: P060, P0316, P0685, P0690
2007 Mercury Mariner Luxury 3.0L 2-3 flair shift no 4th VIN: 4M2YU81137
any input would be out of ideas

Fixes & Summaries for Ford
Fix/Summary Answers
2003 Ford Focus ZX5 2.0L Poor Idle Quality, Misfire, MIL Lamp on VIN: 3FAFP37383
Thanks for all the help guys- we have narrowed the issue down to a possible fuel pump- the customer will "double cycle" the key to prime the system for a while to verify- we will report back if the pump gets replaced. Thanks, Greg and crew
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next