|Prev||Professional Automotive Repair Technical Discussions for February 11, 2012
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2001 BMW 740i 4.4L SRS warning light on VIN: WBAGG83421
Hello BMW Techs We have this car with the SRS warning light on, we checked the connector to the right front door air bag and it looks OK, what other tests we must do to diagnose the repair for this problem. Thanks in advance
|2003 Volkswagen Beetle GLS 2.0L Seat Belt Latch VIN: 3VWCK21C83
Car has broken wires in the female buckle. Cannot find any labor time for seat belt latch r/r. Alldata, identifx have no labor times, just wondering if anyone knew how much i should charge. Thanks for any help.
|2003 Volkswagen Passat GLS 1.8L Mechanical VIN: WVWPD63B03
hi guys i have a 2003 vw passat from a used car dealer they replaced engine flex pipe after 1 hr of driving this car begin to smoke heavy he stated never had this problem before he replaced flex pipe i check the pcv system no oil but found oil in air duct to t...
Fixes & Summaries for European
|1997 BMW 528i 2.8L No Forward Gears VIN: WBADD6323V
Thank you all for helping on this car. It sat for a year and has other problems. The customer is pulling the plug. Here is what I found, It does have forward gears with the trans connector pulled. I can actuate the solenoid with the Autologic tool, but this ha...
|2003 Mercedes-Benz CL500 5.0L Air flow VIN: WDBPJ75J93
Hell Mercedes Techs After testing the new A31y2 (duo valve) that we installed it indicated it was OK,we proceeded to check the wiring from the A/C push button unit to the A31Y29 (duo valve), also it was OK, therefore we inspected the A/C push button unit an...
|1999 Volkswagen Beetle GL 2.0L cylinder head VIN: 3VWCAZ1C0X
Well i removed the insert and applied "the right stuff"sealer and reinstalled insert and intake.this was no good and leaked externally. I then dis-assembled again and applied original formula JB WELD around insert and let it set up overnight.this stopped the e...