 Prev |
Professional Automotive Repair Technical Discussions for September 16, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1991 Ford E-350 Econoline Custom 7.5L Steering VIN: 1FDKE37G4M Ok problem on this one is that the steering is so hard to turn to the right that i need both hands.but to turn to the lelf i can do it with one finger.i did a fluid flush using the bg produt. Which i got good luck in the past. But no luck this time.i got a cow... |
View | |
| 2003 Ford Excursion Limited 6.8L trailer brake VIN: 1FMNU43S23 This truck was purchase used. Customer wants to add an aftermarket trailer brake controller. He has a Curt Reflex with a wiring harness that plugs into factory harness. The problem is the harness under the dash goes through the firewall in a factory harness, c... |
View | |
| 2004 Ford Freestar SE 3.9L noise VIN: 2FMDA51614 Vapor management valve making a rattling/hooting noise during cruise.Noise will go away momentarily on decel. Valve was replaced to fix an evap small leak dtc. Replaced with a second valve from dealer and after two days the noise is back. Hose from intake to v... |
View | |
| 2008 Ford Ranger XLT 4.0L Brake Pedal VIN: 1FTZR15E68 The problem on this truck is: vehicle came without brake pedal,the shop were it came from had replaiced two master cylindes and they never got any pressure to the pedal. We install two new master cylinders from the dealer too;the problem is...after the repairs... |
View | |
| 2008 Ford Expedition EL Limited 5.4L engine VIN: 1FMFK19528 Vehicle was brought into shop some time after oil change a some place like a jiffy lube. Shortly after oil change engine developed a knock on top end. What vescocity of oil used is unknown. After removing valve covers and timing cover we noticed some slack in ... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1987 Ford Ranger S 2.9L Hesitation, Misfire VIN: 1FTCR10T5H I greatly appreciate all the help I revived. I had checked all grounds intake leaks and cleaned injectors with flush at rail, before taking truck to a friends shop before my hart attack. also failed to mention CAT was removed a year ago. My friend changed map... |
26 | |
| 1997 Ford E-150 Econoline 4.2L No Compreson VIN: 1FTEE1426V O MAN YOU GUYS HIT IT RIGHT ON THE HEAD STICKY VALVES SEAFOMED SET OVER NITE DROPED TANK DRAINED REFILED REPLACED FUEL FILTER AND YES ONE BENT PUSH ROD BUT I HAD ALLREADY 44KED IT AND FED IT ATF BEFORE POST IT WAS REALY GUMED UP. A BIG THANKS!!! TO ALL THAT ... |
18 | |
| 2006 Ford F-250 Super Duty Lariat 6.0L Turbo bearing noise VIN: 1FTSX21P46 New turbo fixed it. It had some shaft play and could see housing and fin damage. The customer never complained of the turbo noise when they dropped off so we kind of jumped the gun after the intake cleaning and egr/oil cooler replacement thinking something c... |
4 | |
| 2006 Ford E-250 5.4L Misfire, MIL Lamp on VIN: 1FTNS24L06 Thanks for the replys. I replaced PCM. I also overlayed wiring between #2 coil (-) and PCM. Replaced coil and road tested for 10 miles. All is well Thanks again. Trouble codes: P0302 (Cylinder 2 misfire detected), P0352 (Ignition Coil B primary circuit malfunction), P0316 (Misfire Detected on Startup First 1000 revolutions.). |
11 |
