 Prev |
Professional Automotive Repair Technical Discussions for September 16, 2011 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2003 Audi A4 1.8L Alarm VIN: WAUVC68E63 Have a strange problem and little info. to go on: Initially vehicle exterior lights would not flash with fob operation; replaced fob battery and lights operate/flash normally. Key fob operates lock and unlock normally most of the time (bear with me); horn neve... |
View | |
| 1997 BMW 318is 1.9L MIL Lamp on VIN: WBABE8326V I have a problem with a 1997 BWM 318is 1.9. The vehicle was a no start and was towed in. Upon arrival I tried to start it and found it was flooded. Cleared the flood and the vehicle started, but the ses light was on with code 112. Scoped the cam sensor and it ... Trouble codes: 112 (camshaft position sensor circuit malfunction) |
View | |
| 1990 Mercedes-Benz 560SEL 5.6L Poor Idle Quality, Hesitation, Cuts out, Stall, MIL Lamp on, flash code 7 VIN: WDBCA39E6L my question is on the 7 pin dlc conector under the hood on driverside is the cap that covers the dlc connector supposed to have jumper pins in the top of the cap like a bmw and if so would not have ing them affect the running of the vehicle any help would be a... Trouble codes: 7 (td sensor sig) |
View | |
| 1987 Volvo 244 DL 2.3L Excessive Emissions VIN: YV1AX8859H Vehicle is being difficult. I replaced the t-stat because a .47v (according to my vantage) is below 176f. Old t-stat is rated at 190f as is the new one, old looked ok but replaced anyway because I had it out. From my findings (emissions and o2 sensor) this fue... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 1995 BMW 525i 2.5L Multifunction Clock VIN: WBAHJ6328S Indeed the bulbs were bad for the led backlite as Edgar and Steve stated in their posts.I could not see the leds until I put a flashlight on the display.The bulbs were bad in the salvage yard unit.Thanks again. |
4 |
