|Prev||Professional Automotive Repair Technical Discussions for July 3, 2011
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1997 Nissan Pickup XE 2.4L Poor Idle Quality, Hesitation, Surge, Misfire VIN: 1N6SD11Y7V
a little over a year ago i replaced head gasket on this truck after it han been sitting for 3 years when we started it was knocking so we installed a used engine that acording to the salvage yard had a little over a hundred thousand miles it ran ok but it had ... Trouble codes: P0180, P, 1130 (swirl controll valve controll solenoid valve), P0420
|1998 Subaru Legacy GT 2.5L noise VIN: 4S3BG685XW
This car came in with head gasket problem. It had over 200000 miles so we recommended to rebuild engine. All went well, after about 1000 miles the customer says it has a lifter noise. The noise is there even after the car is warmed up, and you can hear it with...
Fixes & Summaries for Asian
|2001 Honda CR-V LX 2.0L Ball Joint VIN: JHLRD18751
Hi guys, thanks for all the feedback. Since I really haven't seen one break like that unless it was siezed I was wondering if it might be a Honda thing. I did ask her about any groaning noise and she couldn't say. The car is a city car and has been hit on the ...
|2004 Lexus LS430 4.3L Ignition Switch VIN: JTHBN36F74
The steering column had been removed and when it whet back together the module on the column was not plugged back in. Everything went back to normal after module was reconnected. Thanks for all your help iATN members.
|2007 Nissan Titan SE 5.6L unknown VIN: 1N6AA07B47
new tires were making noise. i changed the air pressure in the tires to 60 psi, the noise was still there but it changed dramaticly! thanx for all the replies! Bill
|2004 Subaru Impreza WRX 2.0L MIL Lamp on VIN: JF1GG29604
replaced the tubmle generator sensor/intake assm and all and light is off now. thanks for the help Trouble codes: P1088.