
1997 Nissan Pickup XE 2.4L Poor Idle Quality, Hesitation, Surge, Misfire
a little over a year ago i replaced head gasket on this truck after it han been sitting for 3 years when we started it was knocking so we installed a used engine that acording to the salvage yard had a little over a hundred thousand miles it ran ok but it had ...
FIX posted 7/14/2011
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)9 Replies Received(Hide Replies)9 Replies Received
|
Message Closed w/FIX
|
VIN | 1N6SD11Y7V |
Engine | 2.4 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | Not OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Surge, Misfire |
Occurs | On Accel, Cruise, Idle |
Misc. | Runs Lean |
Trouble Codes
1130 | swirl controll valve controll solenoid valve |
P | |
P0180 | Fuel Temperature Sensor Circuit Signal Voltage Too High |
P0420 | Catalyst Efficiency Below Threshold (Bank 1) |
Message Closed w/FIX
Vehicle Data
1997 Nissan Pickup XE
VIN | 1N6SD11Y7V |
Engine | 2.4 L / 4 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | Not OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Surge, Misfire |
Occurs | On Accel, Cruise, Idle |
Misc. | Runs Lean |
Trouble Codes
1130 | swirl controll valve controll solenoid valve |
P | |
P0180 | Fuel Temperature Sensor Circuit Signal Voltage Too High |
P0420 | Catalyst Efficiency Below Threshold (Bank 1) |