|Prev||Professional Automotive Repair Technical Discussions for August 14, 2010
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2002 Dodge Dakota 3.9L Electronic VIN: 1B7FL16X72
hi evryone, i need you help with this problem, the customer has replace the ECM because the vehicle wont start, by replacing the ecm hi started the vehicle, bud now code p0748 came out, i checck for good power from the relay, power is good, i have check the re...
|2004 Dodge Intrepid SE 2.7L Timing tensioner VIN: 2B3HD46R94
I have the primary tensioner new, due to the old one started rattling after I ran it for a bit. I had just replaced the water pump and head gaskets. I put it all back together and am wondering if the secondary tensioner has a reset like the primary tensioner. ...
|2006 Dodge Ram 2500 Truck TRX4 5.9L Compressor VIN: 307LX39C76
DoeS this system require all codes be cleared for system to function properly?
|1994 Jeep Grand Cherokee Laredo 4.0L Cuts out, VIN: 1J4GZ58SOR
what are values at tps , map supposed to be appears all grounds good have 5 volt reference on two wires
Fixes & Summaries for Chrysler
|2003 Dodge Ram 2500 Truck 5.7L Intermittent mil VIN: 3D7KU26DX3
WELL,IT SEEMS THAT SIMPLY CLEANING THE THROTTLE BODY DID THE TRICK.I HAVE HAD THE CUSTOMER STOP BY A FEW TIMES AND PLUGGED IN THE SCANNER.SO FAR IT HAS NO PENDING CODES.THANKS TO ALL! Trouble codes: P2175 (Throttle actuator systemlow air flow).