Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for August 13, 2010
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1994 Dodge Dakota 3.9L Egr VIN: 1B7GL23XOR
Nox @15 mph is 3318-@25 mph 2663-egr functional-slight missfire.timing not adjustable
View
2001 Dodge Ram 2500 Truck 5.9L a/c VIN: 3NH834H3DD
We changed a/c core due to leak it was extremely contaminated. We charged system 1.875 and compressor clutch keeps kickin in and out gauges arer a bit high then normal. but i have tried starting it with 1lb and easily adding an ounce at a time still no help.
View
1987 Jeep Cherokee Laredo 4.0L Poor Idle Quality, Cuts out, run like retarded VIN: 1JCMR7841H
hello jeep vans. have a 87 jeep that will start and idle ruff backfire in intake and will not accelerate. will only idle at 300 to 450 rpm and sound like the timing is retarded. check all vac leaks egr fuel pressure and signals. the thing that i find odd is th...
View
2002 Other Chrysler 2500 2.7L Stall VIN: WD2YD24142
When slowing down to stop or turn the vehicle will stall every time but starts right back up and runs great has good power and even at cruise goes fine but at cruise when coming off the throttle it wants to stall and sometimes does.our modis scan tool shows no...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1997 Chrysler Town & Country (Van) LXi 3.8L drive shaft VIN: 1C4GT64L1V
Just wanted to say thanks to everyone that sent me info on the this mini van.I was able to remove the rear drive shaft of this AWD van and get it to work just fine with only front wheel drive owner has been driving van for a week now with no problems I did tel...
17
2001 Chrysler Voyager 2.4L gauges turn signals VIN: 1C4GJ25B51
Thank you Jeff [...], you hit it right. Under the fuse box was a corroded wire, repaired the wire and all is good. Thank you very much
5
1995 Dodge Ram 1500 Truck 5.2L Surge VIN: 1B7HC16Y35
Yes Scott, I did check fuel delivery when I put the oxygen sensor in and it was 42 psi with good volume. Jeffery and Donald had great ideas with the EGR coming open, but disabling it had no effect. I also opened the throttle plates to inspect for oil puddling ...
6
1989 Jeep Cherokee 4.0L Drive position VIN: 1J4FJ28LXK
Well I ended up trying a second TCM and it didn't change. I dropped the pan again and put two new shift solenoids in, the one at the very rear and the one in the middle. (I think the front one is the overdrive solenoid) put the pan back on, fluid back in star...
14
2002 Jeep Grand Cherokee Laredo 4.0L Hesitation, Cuts out, power loss VIN: 1J4GW48S92
I am hoping this Jeep is gone for good now. Many thought, including myself that a baffle in the fuel tank would cause this knid of problem. I ordered a new tank. It had no Baffles. The old tank had no baffles. I called Identifix and with the help of them we...
6
2006 Jeep Liberty Limited 2.8L MIL Lamp on VIN: 1J4GL58526
THE VEHICAL IS RUNNING GOOD, NO MORE LOSS OF POWER AFTER CLEANING INTAKE. THE CUSTOMER SAID THE THE CHECK ENGINE LIGHT WAS ON BUT RUNNING FINE, STILL PLANING ON CLEANING EGR AND UPDATEING PCM Trouble codes: P0069, P1265.
3
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next