|Prev||Professional Automotive Repair Technical Discussions for November 23, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1999 Ford Taurus SHO 3.4L No Start VIN: 1FAFP54NOX
I bought this car for myself, it had spun cams and bent valves. Bought the car not running and no real knowledge of past history. I replaced the engine with a known good running engine. It cranks, has spark and no fuel pressure. There is no power at the fuel p...
Fixes & Summaries for Ford
|1996 Ford Thunderbird LX 4.6L Hesitation VIN: 1FALP62W5T
Thank you for the many replies. Most referred to Mass Airflow Sensor problems. I drove the vehicle for a week with a fuel pressure guage hooked up held in place by the wiper blade in the windshield and a scanner hooked up in the car. Of course, never a problem...
|2001 Ford Focus Street 2.0L Steering VIN: 1FAFP34311
Andre from michigan nailed it. After closely looking at strut springs, they were both broken. The heavy plastic had concealed the break. Replaced both as assemblies.Other replies suggested maybe cv joints. Saw this in the archieves. But I felt no vibration in ...
|2003 Lincoln Town Car 4.6L flashing overdrive light. VIN: 1L1FM81W63
thanks for the info guys,it really helped. after three weeks and 3 transmission and some extra grey hair. i finally hit the jackpot.i did a stress test on all eight ignition coils and found out i had 2 bad coils ( # 1 and 6).i replaced them and my problem was ...
|1996 Mercury Villager (Van) GS 3.0L No Start, Poor Idle Quality, Cuts out, Stall, MIL Lamp on VIN: 4M2DV11W4T
Thanks to all who took the time to read this post. I do not think is for the money that we are in this business. We work on cars because we love it, we enjoy it, we have a passion for it. This job is not from 8 to 5, This is a 24 hr job, sometimes even when w... Trouble codes: P1320 (primary ignition signal fault), P0325 (knock sensor ckt problem b1), P0136 (o2 sensor b1s2 problem).