Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for November 23, 2008
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Asian
Help Request Answers
1992 Honda Accord LX 2.2L Poor Idle Quality, Surge VIN: 1HGCB7659N
This car "hunts" during idle Hunting gets worse as car warms up All Data and Mitchell say to check MAP, EGR, idle control and injectors. Car does not have a map that I can find. When I unplug idle control it will stop hunting. No codes. Engine warms up norm...
View
2001 Hyundai Santa Fe GLS 2.7L door locks VIN: KM8SC83D31
i wish i could stick to chevy's that i understand but i don't know or have the diagrams for this so i need help. the driver door sw.unlocks and locks all doors but front pass. the front pass.door sw.unlocks and locks all doors including it self. any ideas as i...
View
1995 Mazda 626 DX 2.0L No Start VIN: 1YVGE22CXS
HELP!!! Vehicle was towed in and no start. Tested spark thinking it was the typical distributor problem--ok. Has 41 psi when cranking. Checked compression and found it to be 175 on the lowest and 180 on the highest. Only problem I can think of is that my Solus...
View
2004 Nissan Sentra 1.8L Poor Idle Quality, High Idle VIN: 3N1CB51D14
Unfortunately I believe this is a self inflicted wound. In the process of performing routine maintenance on this car, I decided to take a look at the throttle body. In removing the snorkel, I disconnected everything attached to it which included a plastic wire... Trouble codes: P0507 (ETC idle rpm too high)
View
1998 Subaru Forester S 2.5L cam seal caps VIN: JF1SF6557W
My problem is not specific to this car, but to this engine. I have done several head gasket replacements on these, and for some reason I am having trouble sealing the cam seal caps. First I tried 'right stuff'. that didn't work.A subaru friend of mine said he ...
View
1999 Toyota Camry CE 2.2L turn signals
Customer complaint is at times turn signals do not operate, or one side flashes faster than the other, or both sides will flash fast. I have verified all bulbs are correct, the hazzards work fine. The power and grounds are fine. I removed the turn signal swit...
View

Fixes & Summaries for Asian
Fix/Summary Answers
2003 Acura RSX Type-S 2.0L ignition sys. VIN: JH4DC53083
Thank you you to every one that replied, After checking for spark, and fuel pressure was 48 psi. We sent the car to an acura dealer,and the timing belt had jumped. This happend when they were driving and shut the car off, and went to restart. 1300 dollars t...
12
1993 Isuzu Pickup S 2.3L Poor Idle Quality, Surge, Stall
thanks for all these fellas that sent me their replies, so far i ck vacuum ,idle adjustments and all other hints , unfortunately the truck its not fix yet, as soon i get some update ill gonna let know,thanks to everybody and to iatn.
6
1998 Mazda 626 DX 2.0L No Compression VIN: 1YVGF22C2W
Thanks again for all the help. We have came to the conclusion that the rings are bad. And the customer wants to put another engine in the car.
28
2003 Mazda Protege ES 2.0L Misfire, MIL Lamp on VIN: JM1BJ22583
General consensus is that it was the catalitic convertor and 02 sensor failure . suggested and priced it out to the customer nut he didnt want to spend that much on an oldedr car !! thanks to all that had replied Trouble codes: P300, P0421.
10
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next