|Prev||Professional Automotive Repair Technical Discussions for May 10, 2008
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|2001 BMW X5 3.0i 3.0L Poor Idle Quality, Cuts out, Stall, MIL Lamp on VIN: WBAFA53561
This BMW X5 came in for an interior door handle repair with no running issues. Car has been sitting for a couple days while we wait on parts. Now upon starting the car it won't idle. Starts fine but immediately stalls. One can keep it running by opening the th... Trouble codes: P0102
|1987 Volvo 244 DL 2.3L Nox VIN: YV1AX8846H
Hi everyone, anyone who has done emissions work done on an older volvo 240 (1987-89) knows that the car will most likely fail for high Nox, by alot. Done the usual, top engine cleaning, slightly colder heat range plugs, coolant flush, MAF adjustment, ect.. Any...
Fixes & Summaries for European
|1987 Porsche 911 3.3L low power, no rev VIN: WPOJB0930H
Hello, And thank you to all who replied. Unfortunately, i have to admit a stupid mistake. The problem was a rag in the turbo intake tube. It was a easy mistake, as the opening to the tube is turned away from you. The rag was sucked right down to the turbo. It...
|2001 Volvo S40 1.9L Stall, MIL Lamp on VIN: YV1VS29531
It was suggested I check/change the CTS, look for air leaks, check (inspect/clean/lube) the idle speed controller, and check/replace the fuel pressure regulator. I checked and double checked each item. I did not change the CTS. I put the old MAF back in. T... Trouble codes: P0102 (MAF signal too low).