Prev iATN Members TechHelp for March 22, 2008
Automotive Technical Exchange for the Automotive Repair Professional		 Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1997 Chrysler Sebring 2.5L tach , odometer
Hi everyone, well the Sebring is back. This is part two of the 6 month project(bodyshop).This is not a no start like last time, that part is o.k but now I have an intermittent loss of tach , odometer and PRNDL display and I did have a P1698 "no TCM CCD messsag...		 View
2002 Chrysler Town & Country 3.8L engine replacement
Hi guy's, I have a 2002 chrysler t&c that I'm going to be replaceing the motor with a used one on monday, according to mitchell your suppose to take it out the bottom, looking at it I'm wondering if I could remove the wiper assembly and take it through the top...		 View
2001 Dodge Durango 4.7L headlights
This vehicle was involved in a minor accident on the right front. The main damage was a bent upper control arm. That was repaired but now the customer is having a problem with all the exterior lights. After a couple of hours of driving the lights start to blin...		 View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1994 Chrysler LeBaron 3.0L transmission goes into limp mode
Thanks to all that replay. After a week of driving I'm confident the car is fixed. The EATX Relay and Solenoid pack fix the car. 		11
2002 Chrysler Town & Country 3.8L Tire Pressure Monitoring System
The fix was a loose connection in the overhead display. Thanks for the help.		 5
1986 Dodge 600 2.2L No Start, Cuts out
OK, I put this car on the back burner till I could put full effort into checking it. I bought everything I could to rebuild a vacume harness. I made sure the orfice for the turbo was installed properly and every hose is by the book. I bought a used DRB II o...		 12
1998 Plymouth Neon 2.0L speedodometer
Thanks to everyone, this must be very common. I took the cluster out, and took it apart. I didnt see any thing wrong with the board, but so many of you said cluster. I replaced it, and now it works. And now I know about this problem, Thanks again to all who...		 12
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next