Prev iATN Members TechHelp for March 1, 2008
Automotive Technical Exchange for the Automotive Repair Professional
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1995 Jeep Grand Cherokee 5.2L viscous clutch
This Jeep feels like is's in 4wd low range when making tight turns only after driving at least 20 miles,as if the front hubs were locked.Could the viscous clutch be the problem?
View
2000 Jeep Grand Cherokee 4.0L pcm
This Jeep came in on a hook, It would start and run for 2 seconds then die. The gauges, windows, and dome light didn't work. I scanned the computer and there were 3 codes P0123(TPS), P1686, and P1687(Inst Cluster & "Skrem". Also There was no communication to T...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1987 Dodge Ram Van 5.2L Differential
Thanks to everyone of you that took time to try and help. The customer decided to let the noise progress. As most of the group suggested, I agree, its probably ring and pinion damage. Just because I can't see damage doesn't mean its not there. We did replace a...
14
1995 Dodge Caravan 3.0L Starting
Dear Members, I found the wiring problem (short in wiring harness) between fuse box and PCM at upper part of driver side fender. I removed the window washer container and I disconnected coupler of main wire harness at firewall, there was 12 volts still on at...
4
1997 Dodge Pickup 5.9L MIL Lamp on
Thanks to all for your time and help. Everything seem to point to the crank sensor as did your replies. My only hesitation was that it only acted up in reverse, despite pulling/tugging and wiggling the wiring while in park and drive with no change. Any way the... Trouble codes: p0320 (no crank ref signal at pcm), p1391 (intermittent loss of cmp or ckp).
9
1999 Dodge Dakota 5.9L valve
Hi all. This one is fixed. Rather than wait on a valve spring shim which would only have bandaided it at best, I pulled the heads. As I mentioned before, I had already measured the installed valve stem height and it was in spec so the seat hasnt eroded or the ...
10
2000 Dodge Ram Van 3.9L Poor Idle Quality, Misfire, MIL Lamp on
well i got some great info from everyone.i backed off the exhaust valve rocket nut 2 turns ,and the misfire went away.tightened it up misfire came back.so it did have a bad valve seat.i got a remn head from the dealer for around $250.00.cheap i thought.put it ...
10
2004 Dodge Neon 2.0L all of electrical
we installed a new battery even though it was not faulty when checked. havent heard back since. about half a week so far. think its ok now. thanks everyone!
5
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next