|Prev||Professional Automotive Repair Technical Discussions for October 7, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1994 Dodge Caravan 3.3L Fluid leak VIN: 1P4GH54ROR
I cannot get the LH axle seal to stop leaking on this 4-speed Chrysler Reman trans. The easy solution would be to send it to a dealer and let them worry about it, as it is under warranty. I do not believe that the leak started right away, as I was alerted to ...
|2000 Dodge Durango 4.7L Excessive Emissions, Misfire, Poor Fuel Economy, MIL Lamp on, Smoke VIN: 1B4HS28N8Y
This vehicle runs rich all the time. The customer has been driving this way for two months. I replaced the spark plugs for extreme wear. I also replaced the upstream O2 because it was stating vehicle was running lean an voltage was at 0v. I installed new O2 an...
|2006 Dodge Ram 1500 Truck TRX4 5.7L Horn VIN: 1D7HU18276
Does anybody know the Horn Chirp Disabling procedure for this car. I have the procedure from Mitchell till 2004, but this doesn't seem to work for a 2006 car, I guess they changed it. In our country it's forbidden to let the horn chirp when you're (un)locking ...
Fixes & Summaries for Chrysler
|2002 Dodge Neon ES 2.0L No Start, MIL Lamp on VIN: 1B3ES26C42
This one left without a FIX or even an explaination. Boss decided we had enough time in it and I had no direction either. It started when it came off the tow truck and has never quit again. I WAS NEVER TOLD that he was driving thru a flooded road and we have h... Trouble codes: P0351 (Ignition coil 1 primary ckt), P0320 (CKP sensor).
|1992 Eagle Talon 2.0L starts and dies VIN: 43ECS44R9N
Thanks to all who replied. Looks like the fuel pump relay contacts can be closed by two separate, independent sets of primary windings around a common core, one is driven through the starter circuit (crank), the other completed through the PCM pin 56(run). Thi... Trouble codes: 42 (Fuel Pump Circuit).