|Prev||Professional Automotive Repair Technical Discussions for July 29, 2007
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Asian
|1999 Acura RL Premium 3.5L Airbag VIN: JH4KA9650X
Hey techs. I keep getting code 09-04 (passenger seatbelt buckle switch fault) on this car. We've replaced the seatbelt switch assembly and have done "wiggle tests" and still can't figure why the code keeps coming back again and again. Help!
Fixes & Summaries for Asian
|1993 Lexus LS400 4.0L Cuts out VIN: JT8UF11E9P
thanks for the replies i got 4 that said they had the same problem and a ecm fixed it. i think this is also my problem, but i have found out the owner, is not doing to good and my be in his last days. if some one buys the car and i fix it i will let you know. ...
|1995 Mitsubishi 3000GT 3.0L Unknown VIN: JA3AM84JXS
Thanks to Tony, Jim, Joe, and Randy. It takes a little pressure off my mind that I didn't misdiagnose this. It doesn't take the burn out of having to do it again. Thanks again
|1998 Mitsubishi Mirage DE 1.5L Excessive Emissions, Hesitation, Surge, Stall VIN: JA3AY11A3W
ok this one is not finish but at least we found what happend here. the head their replace before get to the shop had a broken camshaft so they replace by an 94 1.5 so we swap the camshaft with the rocker arms of a 97 an the first test we do was compression and...
|1991 Toyota Corolla DLX 1.6L Hesitation, Stall VIN: JT2AE94K5M
Mark hit this one right on the nose just minutes after posting. He said a shorted ignition rotor will have the same symptoms as I was having. That was it. Put a new rotor in it and that fixed it. I suppose the extra-hot engine may have cracked the rotor or... Trouble codes: 14 (RPM signal), 24 (intake air temp), 31 (vacuum sensor).
|1998 Toyota Camry CE 2.2L reverse VIN: 2JTBG22K1W
I received 3 replies, all of which suggested things we had looked at, motor mounts, adjustments and internal parts. as of this time the problem has not been found. We tore the transmission back down, carefully fit all splined parts and checked for wear, double...