Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for October 8, 2006
International Automotive Technicians' Network (iATN) - Members Only
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
2005 Chrysler Pacifica Touring 3.5L Power Steering Pump VIN: 2C4GM68465
Chrysler Techs we need your help again on this Pacifica-this is the 2nd post for this vehicle.Replaced power steering pump for excessive noise approx 3 months ago.After replacement did not fix the noise issue-definately power steering pump making the noise-no ...
1997 Dodge Ram 1500 Truck 5.2L solenoids VIN: 1B7HF16Y1V
This all started after the truck came for a smog check, but had a check engine light on. It needed an oxygen sensor ( see post of 9/26 and fix of 10/8 ). The wiring on this truck is in pretty bad shape, and when I separated the connector for the HEGO, I accide...
1998 Dodge Neon High Line 2.0L egr VIN: 1C3EWS34RW
hi guys have this neon with an egr code dont remember the code. but il think its a flow problem. new valve and solenoid. wiring good can work the valve with the scanner. car passes emissions good. does apply when vehicle under load. replaced a pcm with known g...

Fixes & Summaries for Chrysler
Fix/Summary Answers
1996 Chrysler Town & Country (Van) LXi 3.8L Wipers/no start VIN: 1C4GP64L7T
Thanks to all of you Chrysler boys that responded and said that only the dealer can program a new BCM. I took it to the dealer, I installed the BCM and they programed. It works great. Thanks Again Dan
1996 Dodge Caravan 3.0L Cuts out, Stall VIN: 2B4FP2533T
customer was unable to afford diagnostic time.veh.will return when the customer has the proper funds to address the problem ...
1997 Dodge Ram 1500 Truck 5.2L Excessive Emissions, MIL Lamp on VIN: 1B7HF16Y1V
I am going to call this one fixed. I now have good readings out of the O2. Many replies hit it on the head. The 4-5 volts on the O2 line is normal. I replaced the O2 sensor and the data looks good now. However, I induced a new problem. While unplugging the O2 ... Trouble codes: P0132 (High votage HEGO 11), P0305 (missfire cyl 5).
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next