Hey all, I am working on the above 4runner. Customer complaint was the the speedo was inop and the the following lights are on. Cruise, VSC, VSC Trac, Cel with p0500, ABS, and brake light. Per Identifix i did some wiring testing at the Skid Control Module as well as the Yaw rate and Deceleration sensors. Pin 10 and pin 19 of the V18 plug on the Skid Control module are supposed to see 5V reference. pin 19 I am seeing .8v and pin 10 no voltage. However at the sensors I am seeing 5v reference. I am stumped due to the fact I am seeing 5v reference at the sensors but not at the Skid control which sends the voltage to the sensors. I am leaning towards the Skid control Module being the issue with the vehicle do to it controlling all of the components that have lights illuminated. Any help would be greatly appreciated.

Royce Freeman
Manager
Arizona Total Auto Care
Gilbert, Arizona, USA