 Prev |
Professional Automotive Repair Technical Discussions for April 8, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 1988 BMW 325i 2.5L No Start VIN: WBABB2303J Old school Bimmer techs; this e30 cranks but no start, has no spark or inj.pulse while crancking. Here's the work/diag on it done so far: checked timing belt / timing ok Replaced crank/engine speed sensor on front crank pulley DME relay ok (replaced anyway... |
View | |
| 2011 BMW X5 xDrive35d 3.0L reduced engine power VIN: 5UXZW0C55B BMW Diesel techs, need some advise here. I don't see many of these so not to experienced with the bmw diesels. I good customer of mine contacted me and wanted me to pull and clean his egr valve because he had a check engine light and all codes had to do wi... Trouble codes: 4862 (Air system air to egr mass flow plausibility), 4507 (egr controller deviation) |
View | |
| 2013 BMW X3 xDrive28i 2.0L Excessive Emissions, Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire VIN: 5UXWX9C50D This one has been no fun, after replacing the timing chain the engine started and idled quite well for around 30mins, upon acceleration the engine misfired on cyl #4, checked coil and plug and found okay, swapped coil and plug with cyl #3 and engine still ... Trouble codes: P0300 (Random/Multiple misfire detected), P0301 (cylinder 1 misfire detected), P0302 (cylinder 2 misfire detected), P0303 (cylinder 3 misfire detected), P0304 (cylinder 4 misfire detected) |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2013 Fiat 500 Abarth Cabrio 1.4L Misfire, MIL Lamp on VIN: 3C3CFFJH4D Got a new throttle body from Chrysler last week and just installed it. Starts and idles fine. Won't be able to road test until the weekend but need to close this request before it expired. Thanks to everyone who offered advice. Trouble codes: P2172 (High airflow vacuum leak detected), P0507 (idle speed higher than expected). |
5 |
