 Prev |
Professional Automotive Repair Technical Discussions for July 9, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1994 Ford Ranger STX 4.0L 1-2 Shift VIN: 1FTCR14X8R 1st and reverse are fine, after revving up truck will slide into 2nd or sometimes bump when letting off for a few seconds. I have searched Identifix and for any TSB's but find nothing that really matches the symptoms. Once it gets into second it is fine af... |
View | |
| 2000 Ford E-150 Econoline XL 5.4L Air Bag VIN: 1FMRE11L9Y Greetings everyone. I am hoping to get some insight here. Customer (small dealer)brought me this van and claimed it had not been in a collision. It had some left outer bumper damage in the front but shouldn't have been enough to cause an air bag problem. I... |
View | |
| 2013 Ford Fusion SE 1.6L Water Pump VIN: 3FA6P0HR6D We need to replace the water pump on this vehicle. It looks like the timing belt needs to be removed to do what should be a simple job. Anyone ever have done this and do you have any tips or precautions on doing this job? Any advice would be appreciated. T... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2005 Ford F-150 FX4 5.4L Surge VIN: 1FTPW14585 well I found out what was going on with this one. Almost all of the replies said check oil pressure hot. Oil pressure stayed above 35psi hot even at idle. I disconnected the phaser solenoids and got the same thing. I decided to try changing scan tools and went... |
14 | |
| 2008 Ford Crown Victoria Police Interceptor 4.6L Mechanical VIN: 2FAHP71V48 I want to thank everyone who took time to help with this one. I was the blend door actuator was bad and stuck to the hot side. Replaced actuator and everything worked as it should and had nice could a/c. Thank you again, Christopher |
19 | |
| 2008 Ford E-350 Super Duty 6.8L MIL Lamp on Replaced PCM. ran all monitor no check engine light (: Trouble codes: P0155, P0171, P0443, P0135 (HO2S Bank 1 Sensor 1 Heater Circuit Fault). |
4 | |
| 2014 Ford Expedition EL Limited 5.4L Blower Motor VIN: 1FMJK1K52E Okay everyone thank you for the input. It turns out the new BWD control unit is a POS. I got the Motorcraft OEM and the issue is resolved. Lesson learned, stick to OEM electronics. |
5 |
