|
2008 Ford E-350 Super Duty 6.8L MIL Lamp on
Tested both Pin 1 at front 02s plug with ignition on 12.00V (battery volt) (Bank 2S1) Tested with test light with ignition on pin1 (ignition 12v+) and pin2 heater (PCM) test light lighted (on) (Bank 1S1) Tested with test light same as above no light ...
FIX posted 7/9/2018
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 5 Replies Received (View Replies)5 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
5 Replies Received
5 Replies Received
Related Documents & Media | VIN | [No VIN Available] |
| Engine | 6.8 L / 10 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection / EFI |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp On |
| Occurs | Always |
| Misc. | Chassis/Cutaway |
Trouble Codes
| P0135 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit Malfunction |
| P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P0171 | Fuel System Too Lean (Bank 1) |
| P0443 | EVAP Canister Purge Valve Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
2008 Ford E-350 Super Duty
| VIN | [No VIN Available] |
| Engine | 6.8 L / 10 cyl / GAS |
| Trans | 5-speed Automatic (Electronic) |
| Delivery | Fuel Injection / EFI |
| Emissions | OBD-II Compliant |
| Symptoms | MIL Lamp On |
| Occurs | Always |
| Misc. | Chassis/Cutaway |
Trouble Codes
| P0135 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Circuit Malfunction |
| P0155 | Heated Oxygen Sensor (Bank 2 Sensor 1) Heater Circuit Malfunction |
| P0171 | Fuel System Too Lean (Bank 1) |
| P0443 | EVAP Canister Purge Valve Circuit Malfunction |
Video