 Prev |
Professional Automotive Repair Technical Discussions for May 12, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Asian
| Help Request | Answers | |
| 2008 Honda Fit Sport 1.5L No Start, Stall, MIL Lamp on VIN: JHMGD38648 Car came in for starting and dying. MIL was illuminated with lean code. Checked for vacuum leaks, fuel pressure, and spark. Found fuel pressure around 50 PSI cranking and no start condition. At first, it was starting and running for ten or fifteen seconds, the... Trouble codes: P0171 (Fuel metering too lean) |
View | |
| 2010 Honda Pilot EX-L 3.5L MIL Lamp on VIN: 5FNYF4H54A IAT reading -40 degrees on scan tool, Jump GRN/YEl and RED/YEl and reading would go to -280 degrees (indicating a bad MAF) plugged back in a would read 80-100 depending on run time. Intermittenly IAT goes to -40 jump two wires and would stay -40 on scan tool. ... Trouble codes: P0113 (IAT high voltage) |
View | |
| 2008 Kia Optima LX 2.4L Chain Tensioner VIN: KNAGE12328 Bought this Kia with a code for VVT solenoid and running poorly. After inspecting, I changed the oil and added 1/2 quart mystery oil. After running and a hot soak, engine sounded like lifters were not getting oil. I changed the oil and filter with no change.... |
View | |
| 2004 Nissan Quest SL 3.5L Lock Up VIN: 5N1BV28U04 Code P0744 Convertor Clutch no lock up.Code in BCM For loss of VSS. I can not communicate with TCM. I have tried 3 scan tools. Test drive proved that there is no convertor lock up. The issue Im having issue with is condemning TCM due to fact that it is communi... |
View |
Fixes & Summaries for Asian
| Fix/Summary | Answers | |
| 2003 Kia Sorento EX 3.5L Misfire VIN: KNDJD73313 Ok guys. First off, thank you SO much for your time, talent and energy with your suggestions. Ultimately the owner was looking for an excuse to move on from the vehicle and this was just the excuse she needed. Needless to say, she is not overjoyed, but in g... Trouble codes: P0306 (Vehicle has not run [...] enough to set a code since a repair but we have a dead hole on cylinder 6. All other contribute.). |
13 |
