 Prev |
Professional Automotive Repair Technical Discussions for February 3, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1995 Ford F-150 XLT 5.0L Timing Chain Cover VIN: 1FTEF15N1S Hello, Thanks in advance for your time. The 1995 F150 came in with coolant and oil leaks. We found the timing chain cover itself leaking (porous and pitted). We replaced T-Cover, Water pump,seals and gaskets. We delivered the truck only to have it come back wi... |
View | |
| 2003 Ford Escape XLT 3.0L Poor Idle Quality, Hesitation, Surge, Cuts out, Stall VIN: 1FMYU93183 Hard to start, poor reduced idle speed, it may surge then stalls and hesitates when throttle applied. No codes shown and can't get it to run long enough to get any reliable data. Fuel pressure within spec, new fuel filter installed and no water present in fuel... |
View | |
| 2007 Ford E-350 Super Duty 5.4L No Start, Poor Idle Quality, Stall, Misfire VIN: 1FTSE34L27 Just want to throw this out there for anyone. Hope this may help in your diagnosis/repair. I had a 2007 Ford E350 5.4L van come in on the tow truck today for stall while driving/no start. Engine would start after cranking randomly and run rough. I was able to ... Trouble codes: P0305 (p0191-), P0191 (p1233-), P1233 |
View | |
| 2010 Ford E-150 4.6L convertor VIN: 1FTNE1EW2A Vehicle was brought in for routine maintenance. Plugs, trans, and diff fluid service, and "oh by the way, there's a noise coming from underneath sometimes." I checked out the noise and it was coming from the bell housing area. Sounded like a inspection cover r... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1999 Ford F-350 Super Duty Lariat 6.8L MIL Lamp on VIN: 1FTWX33S9X computer was reflashed for incorrect fuel mapping. exhaust backpressure was fine, under heavy load fuel pressure responded correctly up to 46 psi. thank you for the help. Trouble codes: P0172, P0175. |
6 |
