 Prev |
Professional Automotive Repair Technical Discussions for October 8, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2008 Mercedes-Benz ML350 4Matic 3.5L No Start VIN: 4JGBB86E58 i tech i have this car in my shop crank but wont start check for codes no codes check for spark no spark no fuel pressure no injector pulse check for current at coil have current check for current at pump ok check for voltage at injector ok i replaced the cran... |
View | |
| 2011 Mercedes-Benz Sprinter 2500 3.0L limp mode VIN: WDZPE7CCXB This truck is killing us. This request is a continued case that was not closed. Driver put gas in this diesel. I was told he drove 200+ miles. I'm aware you should replace everything in the fuel system hands down. I have done with the exception of r/side rail ... Trouble codes: P0088, P0087 |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 2006 Mercedes-Benz CLS500 5.0L Fuse melt VIN: WDDDJ75X26 Check the wiring and found runs the Rear defrost circuit. I see this has happened to other cars. Andrew from GB good help We cleaned up wires and left it without power. Customer does not have the funds to replace rear glass. Thanks for input guys |
5 | |
| 2006 Saab 9-3 Aero 2.8L Starting VIN: YS3FH51U66 Yes, as Anders offered, it was the esp/abs module. While watching the bus, we were able to manipulate the plug on the module enough to make it change. This gave us the confidence to have the module rebuilt and that fixed it. Thank you to Anders and everyone... |
2 |
