 Prev |
Professional Automotive Repair Technical Discussions for May 23, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2007 Ford F-150 XLT 4.6L Misfire, Poor Fuel Economy VIN: 1FTRX12W07 No accelerate/no power. I have check fuel pressure, spark, injectors are good. In parking step on gas pedal no problem. In drive no power at all.but it runs like misfire |
View | |
| 2008 Ford F-250 Super Duty XLT 6.4L No Start VIN: 1FTSW21R28 need all the help I can get, not a diesel guy. the truck will not start, my desired pressure is 4400 psi, actual pressure is 0. found metal flakes in fuel filter on engine. had a code p0088 and a code po191 and found my lift pump to only have 1 psi. replaced l... Trouble codes: P0088, P0191, P2291 |
View | |
| 2010 Ford Escape XLS 2.5L engine VIN: 1FMCU9C74A This is going to be long, I have this Escape that came to me after Ford garage diagnosed engine miss, needs engine. A shop installed a used engine, they confirmed to me that it had a knock, they said it ran fine afterwards. The customer took it back to them an... |
View | |
| 2012 Ford Focus SE 2.0L Excessive Emissions, MIL Lamp on VIN: 1FAHP3F2XC Looked at vehicle about two weeks ago for parts store owners friend. Had about seven codes including small evap leak. It was a Friday afternoon and he couldn't leave it, so I cleared codes and to see what might show up first when he dropped it off a week later... Trouble codes: P0131, P2196 (B1S1 O2 Biased /stuck rich), P0420 (cat), 171 (Bank 1 lean) |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1994 Ford F-150 XL 4.9L Poor Idle Quality, Surge VIN: 1FTEX15Y2R thanks for all the input guys!! awesome responses! forgot to add some of my test results before, timing was on spec at 10* and did advance to apporx 20* with the spout plugged back in. back pressure was less than 1 at idle and 1.5 at 2500 rpms. PCM was not pul... |
13 |
