P2291 Diagnostic Trouble Code Discussion for May 2016
Injector Control Pressure Too Low - Engine Cranking
Note: This is a professional automotive technician's resource.
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.Trouble Ticket Help Requests for DTC P2291
| Help Request | Posted | |
| 2008 Ford F-450 Super Duty XL 6.4L Stall, MIL Lamp on VIN: 1FDXF46R48 P2291: injector control pressure too low engine cranking. ... after engine gets warm at stops. After vehicle would sit for 20-30 minutes the vehicle would restart. Vehicle was scanned and had codes #'s P0087 & P120F. Fuel Rail Pressure Sensor, wiring harness, and fuel filters were replaced. Vehicle left facility ... |
May 03, 2016 | |
| 2008 Ford F-450 Super Duty XL 6.4L Stall, MIL Lamp on VIN: 1FDXF46R48 P2291: injector control pressure too low engine cranking. ... after engine gets warm at stops. After vehicle would sit for 20-30 minutes the vehicle would restart. Vehicle was scanned and had codes #'s P0087 & P120F. Fuel Rail Pressure Sensor, wiring harness, and fuel filters were replaced. Vehicle left facility ... |
May 04, 2016 | |
| 2008 Ford F-250 Super Duty XLT 6.4L No Start VIN: 1FTSW21R28 P2291: injector control pressure too low. need all the help I can get, not a diesel guy. the truck will not start, my desired pressure is 4400 psi, actual pressure is 0. found metal flakes in fuel filter on engine. had a code p0088 and a code po191 and found my lift pump to only have 1 psi. replaced l... |
May 23, 2016 |
