 Prev |
Professional Automotive Repair Technical Discussions for May 16, 2016 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2004 Dodge Stratus ES 2.7L MIL Lamp on VIN: 1B3EL46R94 Vehicle takes long time to star up, check signals on cranckshaft sensor when cranking the vehicle and found two sides wires with 5v, and one drops to 1.9 to 2v. On camshaft sensor is the same but the one it drops does it from 5v to o up and down.while driving ... Trouble codes: P0344, P0340, P0016 |
View | |
| 2009 Dodge Caliber SXT 2.0L MIL Lamp on this caliber has a p0171 lean code long term fuel trim 30 short term is around -3 to plus 7. 02 sensors up stream bank 1 sensor 1 reading around 0.12 to 0.79 bank 1 sensor 2 readings .12 to .71 i have replaced fuel injectors.map sensor, pcm,02 sensors checked ... Trouble codes: P0171 |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Chrysler Town & Country LXi 3.3L No Start VIN: 2C4GP44372 SORRY for the delay on closing this help request, I still have not fixed this vehicle, but I know where the problem is, it seems to be mechanical,we did a compression test & every time I checked it gave me a different reading sometimes it will show 0 ,60 , or ... |
15 | |
| 2009 Chrysler PT Cruiser LX 2.4L No Start VIN: 3A8FY48979 HEY GUYS. THANKS TO EVERYONE WHO REPLIED TO THIS POST. MOSTLY EVERYONE HIT IT ON THE MONEY. SURE ENOUGH, I HAD THE CPS AND COIL CONNECTORS SWAPPED. THEY LOOK EXACTLY THE SAME AND ARE THE SAME LENGTH AND BOTH MEET AT THE HARNESS AT THE SAME LOCATION. ONCE I SWA... Trouble codes: P0129 (Barometric pressure out of range low). |
10 | |
| 2012 Ram 1500 ST 4.7L Oil Pressure Warning Light In Instrument Cluster VIN: 1C6RD6FP7C A special thanks to Jonathon , a dealer tech who gave information on what they see at the dealership. Since the sender had been replaced twice with OEM parts and problem did not change I did not bother to change it.I saw that the signal at the switch did not c... |
6 |
