 Prev |
Professional Automotive Repair Technical Discussions for September 24, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1993 Ford Mustang LX 5.0L Poor Idle Quality, Hesitation Hi everyone and thanks in advanced. I've been going crazy trying to figure out this old mustang. The car runs great most of the time but sometimes from the start it won't idle 100%, has a hesitation off of idle and it back fires out the exhaust on deceleration... |
View | |
| 2009 Ford F-150 FX4 5.4L auto lock hubs VIN: 1FTPX14V19 This f150 has vacuum control problem at iwe solenoid and vacuum resivouir located on fan shroud next to battery. The line from vac tank with ck valve was missing. I have the missing vacuum harness and iwe solenoid vacuum harness new from dealer every combo i t... |
View | |
| 2010 Ford Escape Limited 3.0L Pedal loss VIN: 1FMCU0D68A This is a strange one. Customer had a panic stop yesterday and said brake went to the floor, car barely stopped. Drove car further and brakes were at floor. Towed to shop. This AM checked fluid level, (good) and drove in parking lot .Brakes felt normal. Road t... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2006 Lincoln Town Car Signature Limited 4.6L All Gears VIN: 1LNHM82V36 Replaced the transmission wiring harness,found out the alternator was bad.(replaced that) It would not allow the computer to reset. Had many codes in other modules. After these repairs we were able to do a relearn and fixed the hard shifts, |
3 | |
| 2008 Mercury Mariner Premier 3.0L ignition switch VIN: 4M2CU87168 Thanks for your help. The lock module was the problem. New oem part comes with an ignition switch. The lock column can be removed without the clockspring coming off if you carefully pull the clockspring forward @ move the lock module backwards. Don't force a... |
5 |
