 Prev |
Professional Automotive Repair Technical Discussions for September 23, 2015 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2000 Chrysler Sebring JXi 2.5L Mechanical VIN: 3C3EL55H4Y Originally came in for brakes pulling to the right. Needed ALOT of work. Replaced front and rear pads and rotors, front and rear calipers, front brake hoses and all the rear brake lines and proportioning valves from the ABS unit back. (All aftermarket parts ex... |
View | |
| 2004 Dodge Sprinter 2500 2.7L transmission/ gauges VIN: WD2PD64484 every once and a while the battery light glow plug light and all the warning light come on I bang on top of the cluster and all lights turn off. When that happens it set a list of codes about can communications missing and erroneous.I replace the cluster and g... |
View | |
| 2004 Dodge Ram 3500 ST 5.9L 1-2 shift VIN: 3D7LU38C24 We have an unusual condition on this Ram truck where the transmission will remain in 1st gear after a long slow pull up a steep grade. This guy hunts. This condition is off-road in 2wd, and not towing or loaded. This is a light throttle, low speed issue. It wi... |
View | |
| 2003 Jeep Wrangler X 4.0L Drum Brakes VIN: 1J4FA39S33 Customer complaint of smelling brakes and vehicle holding back,verified, temps above 500f from the rear brakes after a 15 min drive, tried releasing fluid rear brake not much-only right rear. Does seem could be right front too but rear brakes actually will smo... |
View | |
| 2007 Jeep Wrangler X 3.8L Starting VIN: 1J4FAZ4197 I have a par draw of 1.89 amps and it toggles to .003 every 2 minutes . I have removed every fuse one by one and no change when I unplug the 60 amp I believe it is j 13 I lose the draw but not completely I have 0.11 and then I doesn't toggle from 1.89 . I see ... |
View | |
| 2012 Ram 1500 Sport 5.7L no power VIN: 1C6RD6MT9C When accel from stop has no power once rpm gets up will accell |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Chrysler 300M 3.5L Toe in VIN: 2C3AE66G72 After checking inner tie rod bushings we reset the toe making sure the tie rod clamp was tight. We found play in inner tie rod bushings and lower control arm bushings. Customer was on his way back home and wanted to have his mechanic do the repair. The toe set... |
13 | |
| 2000 Jeep Cherokee Limited 4.0L No Start, Hesitation, Stall, Misfire Taking all the great information into consideration here's the progression for last week. I changed the cam sensor with a mopar unit which made no change. Her backup '99 jeep died on the route earlier this week due to a failed crank sensor so I took the 2 week... |
15 | |
| 2008 Jeep Wrangler Unlimited Rubicon 3.8L sway bar VIN: 1J4GA69168 I relayed all info to the body shop and they re checked all connections etc. No sure exactly what fixed it but they got vehicle delivered and never brought to use to check. Thanks for all replies, David |
7 |
