|Prev||Professional Automotive Repair Technical Discussions for May 27, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2003 Dodge Ram 1500 ST 3.7L No Start VIN: 1D7HA16K23
Just got this truck towed in w/no start. I get fuel pressure but no communication w/scanner . Checked all underhood fuses and they are all good. I do not know about fuel injector pulse or spark ? I Wish I had more info , data , etc...but I don't . What I k...
|2012 Dodge Grand Caravan SE 3.6L MIL Lamp on VIN: 2C4RDGBG1C
Hey all.This Grand Caravan is driving us nuts. Trans was rebuilt about 3 mos.ago. MIL came on a month later P0882 TCM input power low, P06DD engine oil pressure stuck low . The transmission shop determined that the relay in the TIPM was bad they wired in an ex... Trouble codes: P06DD
|2002 Jeep Grand Cherokee Laredo 4.0L MIL Lamp on VIN: 1J4GX48S42
Ok, This Jeep came into the shop with a complaint of hesitation, cruise not working and mil on. Pulled the codes and started testing tps. Looking on IATN, I found that there were numerous posts about the clock spring. I checked and sure enough, I had 5 volts o... Trouble codes: P0121 (Tps voltage doesnt agree with map), P0123 (Tps voltage high)
Fixes & Summaries for Chrysler
|1996 Chrysler Sebring JX 2.4L asd fuse VIN: 3C3EL45X0T
Found the problem to be in the alternator, it was overcharging at higher RPM and blowing the fuse
|2003 Chrysler Concorde LXi 3.5L Hesitation, Surge, Cuts out, Stall, MIL Lamp on VIN: 2C3HD36M43
Unable get this one fixed yet had to give vehicle back to owner he gunna bring it back when symptom becomes more frequent..coincidentally my boss has 1999 300M with same 3.5 motor it just started doing same thing maybe I'll fix his n it b the same as the other... Trouble codes: P0344, P0340.
|1998 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4GZ58SHW
Good afternoon Techs. Got lots of replies(thank you). Most felt it was crank sensor and some was thinking bad wiring, bad coil or bad coil driver. Turned out to be bad coil driver. Had pcm repaired and is running good. Thanks for responding and thanks to those...