|Prev||Professional Automotive Repair Technical Discussions for February 9, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1998 Ford Expedition Eddie Bauer 5.4L engine VIN: 1FMPU18L9W
looking for advice on this truck. it has the original motor that burns oil at start up. 2 plugs were somewhat oil fouled, not sure which cylinders they came from. starts to misfire when motor is under stress, around 1500 rpm power braking or accelerating in 4t...
|2003 Ford Expedition XLT 5.4L vent temperature VIN: 1FMPU16LX3
Gentlemen, I have a Ford Expedition here with a strange problem. First of all the truck came in with no freon in it, and I traced the problem to a leaking evaporator, which I replaced. Now I've got excellent cooling when on MAX air setting, however if I chan...
Fixes & Summaries for Ford
|1965 Ford Econoline 2.4L rotor
Well received some helpful replies.Some of the responders didn't read my request completely.i asked for help in finding used pieces that would work,mostly if somebody had done a conversion like this and used a mustang 2 rotors,bearing numbers or other parts.So...
|1994 Ford Explorer Eddie Bauer 4.0L abs VIN: 1FMDU32XXR
i have found the problem to be rust on the tone ring on the inside of the rotors..thank you to all who have replied
|2005 Ford Escape XLT 3.0L Cuts out VIN: 1FMYU931X5
Thank you everyone for your suggestions. Keith from Massachusetts you nailed it. What we found in the end is the coils were shorting out the ECM intermittently causing it to stall but always restart with no trace. We installed new coils, all is well now, cu...
|2008 Mercury Mariner Premier 3.0L Misfire, MIL Lamp on VIN: 4M2CU97158
We were able to test the ECU drivers this morning and do work correctly, the owner did not want to spend the time testing the cylinder as he stated if the head has to come off I will just drive it like that. Turns out he has been driving the vehicle with that ... Trouble codes: P0301 (Cylinder 1 misfire.).