|Prev||Professional Automotive Repair Technical Discussions for January 22, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|2004 Ford Escape XLT 3.0L Misfire VIN: 1FMCU03174
Thanks in advance for any help on this one. Initially we only found a p0300(random misfire) code set in computer memory but engine was running with a misfire. Engine compression tested at 180 psi on all cylinders. Injectors tested at 13.2 to 13.7 ohms on all c... Trouble codes: P0301 (Cylinder 1 misfire)
|2004 Ford F-350 Super Duty Lariat 6.0L engine VIN: 1FTSX31P74
vehicle came in with no power,rough idle, engine will eventually stall and restart in 10 minutes. codes for skip in cyl.5 ,7. egr code, cam sensor code in history. customer had replaced both fuel filters recently. Injector kill test with solus revealed #7 was ...
|2006 Ford E-350 Super Duty XLT 5.4L Roll stability control VIN: 1FBSS31L06
Hello everyone, got a new problem child in the shop. originally came in with a dead battery and a service RSC system now message, ABS light, and traction control light. First codes revealed an internally shorted PCM. Replaced bad battery. Customer didn't have ...
|2006 Ford F-250 Super Duty XLT 5.4L Electronic VIN: 1FTSX21576
Clicking behind drivers side dash when put in reverse or drive. Have not been able to figure out what is causing the clicking. Has anyone had a similar problem?
|2006 Ford F-350 Super Duty XLT 6.0L Starting VIN: 1FTWW31P76
The engine in this truck was removed to further investigate the the limited rev range. It was thought that there may be some damage to the reluctor wheel on the crank. This proved not to be the case. Engine reinstalled but now have a no start situation. The en...
Fixes & Summaries for Ford
|1996 Mercury Villager GS 3.0L Misfire VIN: 4M2DV11W1T
Only one person answered my question about the scope patterns I had posted and that was Shannon. Thanks for the replies, I had a few tell me about the distributor. The distributor my be noisy but was not bad nor the sensors inside (cam and crank). "squiggly" l... Trouble codes: P0325 (Knock Sensor Bank1), P0300 (Random Misfire).