|Prev||Professional Automotive Repair Technical Discussions for January 7, 2015
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Chrysler Town & Country LX 3.8L no communication VIN: 1C4GP54L1X
Hey everyone and Happy New Year. Concern: Transmission will not shift out of 2nd. Observations: PCM is only module able to communicate with. No modules on CCD Bus respond. Voltage on + and - is at 2.24 volts. Tests performed: all modules except for BCM were...
|1999 Jeep Grand Cherokee Laredo 4.0L Oil Pressure VIN: 1J4GW58S2X
Driver noticed oil pressure gauge was at 60 psi while idling and it's usually 30 psi. Installed master gauge at same port as sender and found it was 57 psi. Removed oil filter. I did notice metal particles when I dumped the oil from the filter so I cut the fil...
Fixes & Summaries for Chrysler
|1991 Dodge B250 3.9L Brake lights VIN: 2B7HB21X7M
power going in was too low. voltage drop. I saw 10 volts or so and its cold so I thought thats ok! No the voltage was too low. I ran a power from battery to the feed and have brake lights.
|2002 Jeep Liberty Limited 3.7L Heater VIN: 1J4GL58K02
THANKS EVERYONE. I WAS 90% SURE IT WAS THE HEATER CORE. JUST NEEDED EVERYONES REASSURANCE BEFORE I DUG IN TO THE DASH. REPLACED HEATER CORE AND ALL IS WELL. HOTTER THAN HELL NOW. THANKS AGAIN.