Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for January 5, 2015
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1991 Dodge B250 3.9L Brake lights VIN: 2B7HB21X7M
I have 12 volts at brake switch. I run a signal from bulb back through to the front and the problem is around the dash. I have park lights and revers lights, got flasher. My question is does the brake light signal go through the flasher switch? All data is vag...
View
2004 Dodge Dakota Sport 4.7L Lr Stop And Turn Lights VIN: 1D7HG38N34
Customer dropped truck off for service,and asked if i could make sure to replace the left rear turn signal bulb because it was flashing fast,and the front turn signal was lighting.after replacing bulb,i was surprised to find that left rear still was not lighti...
View
2002 Jeep Liberty Limited 3.7L Heater VIN: 1J4GL58K02
Vehicle came in with a no heat issue. After checking the system, i noticed that the heat was luke warm at idle.driving vehicle the heat would go almost cold. Back flushed heater core and flushed heater lines. Seemed to have good flow. Replaced radiator because...
View
2007 Jeep Grand Cherokee Laredo 4.7L Abs Module VIN: 1J8HS48P57
My customer says when his wife enters his driveway. The brake pedal will fade and recover quickly.To enter the driveway there is a dip a turn and up a incline and she does this at fairly good speed.I have inspected the brake system and have found nothing.I can...
View
2012 Ram 2500 SLT 6.7L head gasket VIN: 3C6VD5GL8C
Truck will start to overheat and eventually the thermostat will open up and drop the temp down to normal. System seems to be building a lot of pressure also. I moved the truck maybe 25 yards and when i released the pressure on the cooling system it all shot in...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2014 Dodge Durango R/T 5.7L coat hook VIN: 2014D0DGED
Thanks to those who responded quickly. Just could not accept the idea I had to destroy the hook a replace it with a new one. Drilled a hole up threw it and there was the screw, what a waste. Dealer will have two new ones in the AM. Thanks again to all.
6
1995 Jeep Cherokee Country 4.0L Mechanical VIN: 1J4FJ78S2S
Thank you to everyone who replied. After double checking my charge in the system I had the vehicle running with the pressure oscillating between 350 and 400 when [...] in the shop. I tapped a few times on the expansion valve and a few seconds later, it st...
20
2005 Jeep Grand Cherokee Laredo 4.7L No Start VIN: 1J4HS48N55
Thanks to all who replied.The module is located on the key/lock cylinder & I was missing it because it was on the top of the assembly. The fix was the electrical switch for the ignition. Once again the info here was invaluable! Trouble codes: U0168, P0513, B1A25, B1A35.
13
2007 Jeep Wrangler Unlimited X 3.8L door locks VIN: 1J4GB39157
I decided go by the process of elimination so first I asked my customer to keep the battery removed from the key fob for a couple of days and see if problem reoccur and a week later call the customer and confirm that the problem had gone away, also tried with...
4
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next