|Prev||Professional Automotive Repair Technical Discussions for November 13, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
Open Help Requests for Ford
|2005 Ford F-250 Super Duty King Ranch 6.0L No Start, Stall VIN: 1FTSW21PX5
No start cranks ok no FICM sync. Truck first came in as a cold start and stall in the first five minutes, restart ok and drive fine. P0341 Cam Postion sensor circuit performance, was recorded. Lab scoped the cam sensor and crank sensor. At this point the truck... Trouble codes: P1624 (Cam signal output circuit open), P0341 (Cam Postion sensor circuit performance)
|2006 Ford F-250 Super Duty XL 5.4L Poor Idle Quality, Hesitation, Surge, Misfire, MIL Lamp on
Hey guys really need help on this one asap. This ford came in with code p0012 and rough idle. I scanned the pcm and got code for bank 1 cam over retarded (p0012) I also noticed on live data there was no movement of the vct stats for bank 1 during throttle but ... Trouble codes: P0012
Fixes & Summaries for Ford
|1996 Ford Aerostar XLT 4.0L Temperature Gauge VIN: 1FMDA41X5T
Thank you to everyone that replied to this. We wound up at the rear heater core, we tried to flush it and could not get water to pass through, we then removed the vacuum valve in front of the heater core and fluid would pass through the heater core we left the...
|2000 Ford Explorer XLS 4.0L ABS Activation VIN: 1FMZU72EXY
Thanks everybody, installed 2 front wheel brgs. Seems to have fixed the problem. The no data issue seems to be with the scanner. Thanks again.
|2004 Ford F-350 Super Duty Harley-Davidson Edition 6.0L No start VIN: 1FTSW31P14
It's Gone. High pressure oil pump was Blown up. Back of Housing broke. Pump locked up Gear unscrewed itself. After I pulled & cleaned the oil pan, Checked the low Pressure pump, Replaced the worn out Turbo, Glow plugs & Harness's it Done. What a Job. Thanks Fo...
|2014 Ford F-250 Super Duty XL 6.7L Cuts out VIN: 1FT7W2BT2F
We had found an air leak at the primary fuel filter. The Pickup did not leak fuel out of the filter assembly, but did suck air in at top of canister. It was found that I did not fully seat canister housing by a 1/4 turn. I could not find torque spec. in "no" ...