|Prev||Professional Automotive Repair Technical Discussions for October 20, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2004 Dodge Durango SLT 5.7L Engine VIN: 1D4HB48D34
customer brought into the shop for a noise complaint after changing the oil. Engine oil is full, correct filter is installed. no miss fires and it idles normal besides the noise. the noise is coming from the bell housing area but I can not determine if the noi...
|2005 Dodge Ram 3500 SLT 5.9L accelerates by itsel VIN: 3D7LS38C45
vehicle over 2000 rpm acts like throttle sticks stays high with no throttle pressed??? if u shut key off it come back normal with possible hard start at first
|2003 Jeep Grand Cherokee Limited 4.7L Ventilation VIN: 1J8GW58N03
Good Morning fellow technicians. I have a 2003 Jeep Grand Cherokee here that has been giving us trouble. All of the blend doors and actuators have been replaced and bench tested for proper operation. Also the AC control head has been replaced due to driver's s...
Fixes & Summaries for Chrysler
|1998 Dodge Grand Caravan ES 3.8L Low Pedal VIN: 1B4PG54LXW
Thanks for all the replies. I have the brake pedal up and it stops, but not as good as I think it should. It does stop, but have to push harder than I think it should for a panic stop. (The ABS doesn't seem to respond) I previously checked and adjusted the r...
|2012 Jeep Liberty Sport 3.7L Misfire VIN: 1C4PJLAK0C
Thanks again to everyone who replied. The customer took the vehicle to a Chrysler dealership to be repaired. He did report to us that the dealer told him the engine was bad and needed to be replaced. The dealer did not elaborate on what was wrong with the engi... Trouble codes: P0300 (Random misfire).