|Prev||Professional Automotive Repair Technical Discussions for August 15, 2014
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Dodge Durango SLT 5.9L 1-2 upshift and passing gear VIN: 1B4HS28Z7X
Thanks in advanced! Durango was purchased by me, while normal driving vehicle seemed to shift normal, under WOT would not shift out of 1st gear with out slight depression of throttle. We adjust the kick down cable to no avail. Not being a tranny guy at all I d...
|2002 Dodge Durango SLT Plus 4.7L No Start VIN: 1B4HS58N12
Hi Guys and Girls I have this Durango which was towed to my shop because the shop that installed the engine could not get it to run.I asked them if the old engine ran, and they told me it did but had a knock. I was wondering if the tone wheels change in this e... Trouble codes: 335 (crank sensor circuit)
|2003 Dodge Durango Sport 4.7L 4 wheel drive VIN: 1D4HS38N73
The 4wd light comes on after 20 seconds. The 4wd is inop. The only code in the TCCM is "Internal Error". I have replaced the TCCM, no change. On the scanner the 4wd switch pid reads ???. I replaced the switch, no change. I have checked all circuits and recheck...
|2007 Jeep Wrangler Unlimited X 3.8L cruise VIN: 1J4GA39167
-Truck has no cruise control. Lifted truck and modified truck, very well maintained rig. Checked Fuses, cruise switch, continuity to ECM, made sure no other codes prevented operation of cruise. (We had a steering angle code, but fixed) My two question here are...
Fixes & Summaries for Chrysler
|1989 Jeep Wrangler Islander 2.5L No Start, Poor Idle Quality, Cuts out VIN: 2J4FY39E7K
Replaced ignition module. Seems to start regularily now. Customer will return for further electrical diagnosis on IAT & CTS in the fall.